Bronze models are forged with stainless pins.. Wire Dia., 5/16" Pin 4" Pin, 1/4" Line. These kits contain everything for installing a simple, variable system Keep your mainsail under control and on the boom as it lowered. (227kg) 435 furler for dinghies to 20ft. Gross trim/fine tune mainsheet systems are easy to install and use. 10.6' to 16' (3.2m 4.87m); mainsail luff length. (3.7m 4.9m); mainsail luff length. Spend more time boating and less time anchoring!Efficient and reliable windlasses feature low maintenance, 100% 316 stainless steel housings for long lasting protection and durability, especially in salty climates. Designed for easy installation and can be operated manually with a standard 1/2" ratchet handle (sold separately). Economy shackles for use where you don t need them to swivel. Mid Range Captive Ball Traveler Cars Midrange Cb Windward Sheeting Adapter Kit, 3/8" Max. Max Load, 14 18a Draw, 70'/min Speed Up, 350'/min Down.

Pre swaged wires, blocks, eyestraps, line, a cleat, fasteners and instructions (including how to alter your sail cover for use with lazy jacks). 10.6' to 16' (3.2m 4.87m); mainsail luff length. (7m Harken Lazy Jack Systems Medium Boat Length 27" 37", Boom Min. Every sailor rigs their boat differently, so in addition to lightening the block, the soft attach m Harken Lazy Jack Systems Small Boat Length 21" 28", Boom Min. Ronstan Fixed Bail Snap Shackles Stainless Shackle, 363lb. Schaefer's Lazy Jacks funnel the sail down to the boom and retain it, keeping you safe in the cockpit and allowing you to properly secure the sail when you are moored. Harken Two Speed Mainsheet Systems 3:1/6:1 Gross Trim/fine Tune System, 5/16" Min. 434 furler for dinghies under 16ft.

Designed to automatically drop ground tackle up to six times faster than comparable power down models, these helm operated, free fall windlasses give you remote operation with simple switch activation, eliminating the need to go forward during anchoring. Nylon coated aluminum Capstan/Gypsy Material. 32' to 42' (9.75m 12.8m) Large Boat Boom Length. Two years on Free Fall 31; three years on Free Fall 36/41/46 Harken Small Boat Furling Kits Cruising For Length To 25', 2000lb. Midrange CB track 1602, 1616, 1617, 1618 Material. Works exceptionally well with fully battened mains, but can also be used with conventional sails. The jib luff wire must be properly seized to the sail, since it carries most of the headstay load. Lazy Jacks control the mainsail when reefing or dousing, and easily tame today's mainsails whether full battened or conventional type.

They allow for the use of an existing sailcover without the need for extensive modifications. Includes Switch Gear and installation kit. Everything you need to install a simple, adjustable system is included in the kit. Description Double fiddle/ratchet/cross block/412 Can Matic Primary sheave dia. Rubberized deck gasket protects your deck. Two speed mainsheet systems come in three configurations for boats from 22 feet to 39 feet (6.5 m to 11.8m), with mains as large as 3502 (32.4 m2). Harken Small Boat Furling Kits Furler For Length To 16', 500lb. Two speed mainsheet systems come in three configurations for boats from 22 feet to 39 feet (6.5 m to 11.8m), with mains as large as 3502 (32.4 m2). Use 50% of this value, at most, for working load. Mainsheet systems, offshore boats 27' to 34' Ball Bearings.

32' to 42' (9.75m 12.8m) Large Boat Boom Length. 7' to 13' (2.13m 3.96m); mainsail luff length. You must supply the drum furling line in the diameters shown in the chart. Thimbled eyestraps attached to the bottom of your boom keep the hardware away from the cover and enable you to tuck your sailcover under the lazy jack ronstan fixed bail snap shackles stainless shackle, 363lb mwl, 3/16"/ 1/4" min /max line dia control lines. Pre swaged wires, blocks, eyestraps, line, a cleat, fasteners and instructions (including how to alter your sail cover for use with lazy jacks). (431kg) 436 furler for cruising boats to 25ft. Bronze models are forged with stainless pins. 35'7" to 48' (10.88m 14.63m) Includes pre swaged vinyl coated stainless cable, ball bearing blocks, eyestraps, line, a cleat, fasteners, and pictorial instructions. Housings are corrosion resistant marinegrade aluminum with triple finish nylon coating. 32' to 42' (9.75m 12.8m) Large Boat Boom Length. (227kg) 435 furler for dinghies to 20ft. Works exceptionally well with fully battened mains, harken lazy jack systems small boat length 21" 28", boom min 7'0", max 13'0 but can also be used with conventional sails.

21' to 32' (6.4m 9.75m) Medium Boat Boom Length. Drive shafts, rope and chain guide systems, and fasteners are stainless steel. They feature high load sheaves and come in single, double, and triple configurations. Drive shafts, rope and chain guide systems, and fasteners are stainless steel. Everything you need to install a simple, adjustable system is included in the kit. The spring loaded cleat fits on 1" and 1 1/4" T track, so you can make quick and easy position changes without tools. Machined one piece aluminum car Breaking Strength. Harken Two Speed Double Ratchet Mainsheet System With Fiddle And Cam Matic.

Use 50% of this value, at most, for working load. 35'7" to 48' (10.88m 14.63m) Includes pre swaged vinyl coated stainless cable, ball bearing blocks, eyestraps, line, a cleat, fasteners, and pictorial instructions. Flared cheeks prevent chafe on the halyards. 35'7" to 48' (10.88m 14.63m) Includes pre swaged vinyl coated stainless cable, ball bearing blocks, eyestraps, line, a cleat, fasteners, and pictorial instructions. Two years on Free Fall 31; three years on Free Fall 36/41/46 Harken T2 Soft Attach Blocks Single Block, 57mm Sheave Dia., 3 1/16" Length, 2.0oz., harken t2 soft attach blocks single block, 57mm sheave dia , 3 1/16" length, 2.0oz , 10mm max line 792lb working load, 2380lb breaking 10mm Max.

21' to 32' (6.4m 9.75m) Medium Boat Boom Length. Powerwh Free Fall Windlasses #41, For Boats Up To 41', 5/8" Line, 5/16" High Test Chain, 875lb. Constructed of Hardkote anodized Teflon impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. Built for high loads on offshore cruisers and racers. 434 furler for dinghies under 16ft. For fast trimming, lewmar pro series stainless steel windlasses h700, boats to 38', 1/2" line dia , 1/4" ht chain, 700lb max pull, 35a draw 12v, 88' (175lb ) speed up, 100'/min pull both tails of the mainsheet. Max Load, 10 14a Draw, 75'/min Speed Up, 300'/min Down.

These cars run freely, fit low beam traveler track and are easy to adjust under any load. All models handle both rope and chain, with high test chain and medium lay nylon rope, such as New England Ropes Premium Three Strand Line required. 6 5/16"H x 7"W x 10 9/16"L Case Material. Made of corrosion resistant, polished, investment cast 316 stainless, this strong, adjustable cleat can also be used as a chock. Wire Dia., 1/4" Pin 2 1/2" Pin, 5/32" Line. Now with captive ball bearings, which eliminates the need for a ball bearing loader during installation or removal from track. Harken Two Speed Double Fiddle Mainsheet System With Ratchet, Cross Block, And 412 Cam Matic.

Gross trim/fine tune harken lazy jack systems large boat length 35" 42", boom min 12'0", max 16'0 mainsheet systems are easy to install and use. Harken Captive Ball Bearing Spinnaker Pole Cars Car, Track #1616, 1350sq.ft. Powerwh Free Fall Windlasses #46, For Boats Up To 46', 5/8" Line, 5/16" High Test Chain, 1100lb. (3.7m 4.9m); mainsail luff length. Pre swaged wires, blocks, eyestraps, line, a cleat, fasteners and instructions (including how to alter your sail cover for use with lazy jacks). Its composite structure makes T2 the lightest soft attach block Harken has ever designed. Applied industrial design and new branding gives this patent pending block a hot new look that appeals to racing sailors both young, and young at heart. Harken Captive Ball Bearing Spinnaker Pole Cars Car, Track #2720, 900sq.ft. Over the top blocks lead lines aft over cabin houses, coamings, and splashguards. To install, powerwh free fall windlasses #41, for boats up to 41', 5/8" line, 5/16" high test chain, 875lb max load, 10 14a draw, 75'/min speed up, 300'/min down simply remove track end stop, slide on the cleat and lock into desired position. Recirculating ball bearing travelers move freely under non vertical loads and have a low profile design. For fast trimming, pull both tails of the mainsheet.

You must supply the drum furling line in the diameters shown in the chart. 5 3/4"H x 7"W x 9 3/4"L Fiv Harken Lazy Jack Systems Large Boat Length 35" 42", Boom Min. Ronstan Fixed Bail Snap Shackles Stainless Shackle, 2200lb. Recirculating captive Torlon bearings in open races Track Type. The jib luff wire must be properly seized to the sail, since it carries most of the headstay load. Description Double ratchet fiddle/412 Cam Matic Primary sheave dia. Designed to automatically drop ground tackle up to six times faster than comparable power down models, these helm operated, free fall windlasses give you remote operation with simple switch activation, eliminating the need to go forward during anchoring. Functional load is the point at which snap shackles distort beyond usability but before they break. Two Speed Double Fiddle Mainsheet System with Ratchet, Cross Block, and 412 Cam Matic. These kits contain everything for installing a simple, variable system Keep your mainsail under control and on the boom as it lowered. (7m Harken Two Speed Mainsheet Systems 4:1/8:1 Gross Trim/fine Tune System, 5/16" Min. Everything you need to install a simple, adjustable system is included in the kit.

Rubberized deck gasket protects your deck. Pull, 35a Draw 12v, 88' (175lb.) Speed Up, 100'/min Down. Harken Carbo T2 is the first block with no fasteners, rivets, or other metal parts to add weight. 6 5/16"H x 7"W x 10 9/16"L Case Material. Two Speed Double Ratchet Mainsheet System with Fiddle and Cam Matic. 21' to 32' (6.4m 9.75m) Medium Boat Boom Length. Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Includes fasteners, eye straps, jam cleat, lashing eye blocks with elkhide chafe guards, vinyl coated wire, cheek blocks and Dacron double braid with eye splices..

For fine tuning, pull one tail and the purchase doubles. These mid range captive ball traveler cars midrange cb windward sheeting adapter kit, 3/8" max line dia , fits harken 1624, 1625, purchase 3:1/4:1 cars run freely, fit low beam traveler track and are easy to adjust under any load. A West Marine Innovative Product for 2011. These systems, now sold as drum and swivel kits, are for roller furling, not for reefing. Permanent magnet motors are coupled to highly efficient spur gear drive trains resulting in a low amp draw, making these horizontal rope/chain units ideal for small boats with limited battery capacity. Sail Area (end boom), 275 (mid boom). (3.7m 4.9m); mainsail luff length. Economy shackles for use where you don t need them to swivel. These systems, now sold as drum and swivel kits, are for harken two speed double ratchet mainsheet system with fiddle and cam matic roller furling, not for reefing. Line Dia., Fits Harken 1624, 1625, Purchase 3:1/4:1. Sail Area (end boom), 180 (mid boom). Schaefer Lazy Jack Systems Large System, 37' 48' Boat Length, 12'0" Min., 16'0" Max.

Onto this moveable, low profile, heavy duty cleat. All models handle both rope and chain, with high test chain and medium lay nylon rope, such as New England Ropes Premium Three Strand Line required. 7' to 13' (2.13m 3.96m); mainsail luff length. Works exceptionally well with fully battened mains, but can also be used with conventional sails. Captive balls allow easy installation. Reduce deck clutter, tie spring lines, fenders, dinghies, etc. These kits contain everything for installing a simple, variable system ronstan fixed bail snap shackles stainless shackle, 2200lb mwl, 7/16" 3/4" min /max line dia Keep your mainsail under control and on the boom as it lowered. 7' to 13' (2.13m 3.96m); mainsail luff length. Include ring fitting and control block shackles (order control blocks separately). Harken Mast Base Halyard Lead Blocks 57mm Over The Top Double Block, 2 7/16"w X 3 1/4"l 1/4"h, 3/8" Max Line Dia., 2500lb. Housings are corrosion resistant marinegrade aluminum with triple finish nylon coating. Nylon coated aluminum Capstan/Gypsy Material.

For fine tuning, harken two speed double fiddle mainsheet system with ratchet, cross block, and 412 cam matic pull one tail and the purchase doubles. (in) 1 3/4 Length (in) 7 1/4 Weight (oz) 31 Lewmar Pro Series Stainless Steel Windlasses H700, Boats To 38', 1/2" Line Dia., 1/4" Ht Chain, 700lb. Toggle cars are designed with low pivot points for efficient load transfer and serve as a stand up for mainsheets. (431kg) 436 furler for cruising boats to 25ft. T2 blocks have been tested by Harken sponsored Olympic and world class sailors and received rave reviews for their flexibility, harken small boat furling kits furler for length to 16', 500lb swl, 1/8" max wire dia , 1/4" pin 2 1/2" pin, 5/32" line strength, and smooth operation, Harken new soft attach blocks are so light, smooth rolling, and dependable, I don t even know they re there, said Harken Speed Team sailor Andrew Campbell, a Star and Laser champion. Short track lengths can be installed for using the cleat in other locations aboard. Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Now with captive ball bearings, which eliminates the need for a ball bearing loader during installation or removal from track. (in) 2 1/4 / 1 3/4 Length (in) 11 1/2 Weight (oz) harken mast base halyard lead blocks 57mm over the top double block, 2 7/16"w x 3 1/4"l 1/4"h, 3/8" max line dia , 2500lb max working load, 5000lb breaking 37 Schaefer Mid Rail Cleats Cleat, Fits 1 1/4" X 3/16" Track, 5/16" Pin Dia., 5/8" Max. Constructed of Hardkote anodized Teflon impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. Include ring fitting and control block shackles (order control blocks separately).

Low profile mast base halyard lead blocks are lightweight and can be grouped in a small area at the mast base. 10.6' to 16' (3.2m 4.87m); mainsail luff length. Functional load is the point at which snap shackles distort beyond usability but before they break.