No membrane damage, sanitization of the permeate side of the membrane, easy direct access or easy to produce, killing bacteria, preventing bio fouling development, non toxic, no permit required to store or handle chemical, no disposal costs and comparatively inexpensive.. AG4040FF High Rejection Brackish Water elements feature a FRP outerwrap and 27 mil feed spacers. In numerous pure water applications, GE Osmonics Duratherm Hot Water Sanitization is utilized to ensure consistent product quality, bacteria free packaging and membrane system performance. The capacity of the GE Desal HWS 2521 Durtherm RO Membrane is 270 Gallons Per Day. 10 psig (69 kPa) per element50 psig (345 kPa) per vesselFeed NTU. Thin Film Membrane (TFM )Typical Operating Pressure. Thin Film Membrane (TFM )Typical Operating Pressure. 450 psig (3,103 kPa)Maximum Temperature. This element is designed with male end connections. Element Specifications ModelFlowActive AreaAvg. RejectionPart NumberAG4014TF585 GPD22 ft299.5%99%1206748Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours.

AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. Part #'s also associated with GE Desal HWS 2540 Duratherm is Desal Part # 1228430. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. Its dimensions are 2.5" W X 21" L and the maximum pressure is 600 psig. The device Typical Operating Flux is 10 20 GFD (15 35) L.H 1.M 2 and the Typical Operating Pressure is 200 psig. These elements allow moderate energy savings, and are considered a standard in the industry. 10 20 GFD (15 35) L.H 1.M 2  Duratherm HWS elements are designed, engineered and manufactured to provide consistent, reliable performance under extreme operating parameters, withstanding periodic exposure to temperatures as high as 90 C for cleaning and chemical free sanitization while operating below 50 C.GE Osmonics Duratherm high temperature water sanitization is an effective and cost efficient solution for many HWS RO Industry Applications including. 122 F (50 C)Chlorine Tolerance. 2.0 11.5Maximum Pressure Drop. In numerous pure water applications, GE Osmonics Duratherm Hot Water Sanitization is utilized to ensure consistent product quality, bacteria free packaging and membrane system performance. These elements allow moderate energy savings, and are considered a standard in the industry.

Individual flux may vary 25%/ 15%. Operating and Design Parameters Membrane. Part #'s also associated with GE Desal HWS 2521 Duratherm is Desal Part # 1229607. Individual flux may vary 25%/ 15%. Operating and Design Parameters Membrane. AG2514TF High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. Dialysis, Pharmaceuticals/Food/Cosmetics /Drinking Water and Power/Semi conductor/Sensitive Water.

These elements allow moderate energy savings, and are considered a standard in the industry. AG4014TF High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. Dialysis, Pharmaceuticals/Food/Cosmetics /Drinking Water and Power/Semi conductor/Sensitive Water. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH. Dialysis, Pharmaceuticals/Food/Cosmetics /Drinking Water and Power/Semi conductor/Sensitive Water. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired.

RejectionPart NumberAG2540TF740 GPD28 ft299.5%99%1206729Specifications are based on a 2000 mg/L NaCl solution at 225 psig ge desal (1206719) ag series tap water/brackish ro elements ag2521tf; 2.5" x 21" 300 gpd tfc; tape operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. 10 20 GFD (15 35) L.H 1.M 2 The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH. This element is designed with male end connections. Element Specifications ModelFlowActive AreaAvg. 10 20 GFD (15 35) L.H 1.M 2 The H Series proprietary thin film nanofiltration membrane elements are characterized by an approximate molecular weight cut off of 150 300 daltons for uncharged organic molecules. No membrane damage, sanitization of the permeate side of the membrane, easy direct access or easy to produce, killing bacteria, preventing bio fouling development, non toxic, no permit required to store or handle chemical, no disposal costs and comparatively inexpensive. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH.

Individual flux may vary 25%/ 15%. Operating and Design Parameters Membrane. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH. RejectionPart NumberAG3308T320 GPD (1.2 m3/d)99.5%99%1206740Specifications ge desal hws 4040 durtherm ro membrane are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. Recommended pH (cleaning below 50 C) is 2.0 11.5 and the Maximum Pressure Drop is 15 psig per element; 60 psig per vessel. Duratherm Hot Water Sanitization also offers additional advantages as compared to biocide options, including. The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. 1,000 ppm hrs, dechlorination ge desal (1228459) durtherm hot water sanitization hws 4040 durtherm 4" x 40" 2000 gpd recommendedOptimum Rejection pH. In numerous pure water applications, GE Osmonics Duratherm Hot Water Sanitization is utilized to ensure consistent product quality, bacteria free packaging and membrane system performance. 10 20 GFD (15 35) L.H 1.M 2 GE Osmonics Duratherm high temperature water sanitization is an effective and cost efficient solution for many HWS RO Industry Applications including. Its dimensions are 2.5" W X 40" L and the maximum pressure is 600 psig. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. Individual flux may vary 25%/ 15%. Operating and Design Parameters Membrane.

AK3218T Low Pressure Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. This element is designed with male end connections. Element Specifications ModelFlowActive AreaAvg. 10 20 GFD (15 35) L.H 1.M 2 Duratherm HWS elements are designed, engineered and manufactured to provide consistent, reliable performance under extreme operating parameters, withstanding periodic exposure to temperatures as high as 90 C for cleaning and chemical free sanitization while operating below 50 C. RejectionPart NumberAG4040FF2,200 GPD85 ft299.5%99%1206761Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. It has a Thin Film Membrane and the Maximum Temperature is 122 F (50 C). Individual flux may vary 25%/ 15%.Operating and Design ParametersMembrane.

Duratherm Hot Water Sanitization also offers additional advantages as compared to biocide options, including. No membrane damage, sanitization of the permeate side of the membrane, easy direct access or easy to produce, killing bacteria, preventing bio fouling development, non toxic, no permit required to store or handle chemical, no disposal costs and comparatively inexpensive. Chlorine Tolerance is 500 ppm hrs and the recommended pH operating below 50 C is 2.0 10.0. The capacity of the GE Desal HWS 8040 Durtherm RO Membrane is 9200 Gallons Per Day. The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.

Ge desal (1206799) ak series low pressure ro elements ak2521tf; 2.5" x 21" 300 gpd tfc lp dry Duratherm HWS elements are designed, engineered and manufactured to provide consistent, reliable performance under extreme operating parameters, withstanding periodic exposure to temperatures as high as 90 C for cleaning and chemical free sanitization while operating below 50 C. Individual flux may vary 25%/ 15%. Operating and Design Parameters Membrane. Individual flux may vary 25%/ 15%. Operating and Design Parameters Membrane. 450 psig (3,103 kPa)Maximum Temperature. Duratherm Hot Water Sanitization also offers additional advantages as compared to biocide options, including. Thin Film Membrane (TFM )Typical Operating Pressure. RejectionPart NumberAK3218T460 GPD 99.5%99%1206803Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. Divalent and multivalent ion rejection is dependent upon feed concentration and composition.GE HL2521TF Nanofiltration ge desal (1206750) ag series tap water/brackish ro elements ag4021tf; 4" x 21" 1050 gpd tfc; tape Elements are used for water softening, color removal, and reduction of THM potential.GE Osmonics Desal HL2521TF Nano Filtration elements feature a tape outerwrap and 28 mil feed spacers and is designed with male end connections.. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry.

It has a Thin Film Membrane and the Maximum Temperature is 122 F (50 C). It has a Thin Film Membrane and the Maximum Temperature is 122 F (50 C). AG2521TF High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. Dialysis, Pharmaceuticals/Food/Cosmetics /Drinking Water and Power/Semi conductor/Sensitive numerous pure water applications, GE Osmonics Duratherm Hot Water Sanitization is utilized to ensure consistent product quality, bacteria free packaging and membrane system performance.Duratherm ge desal (1206729) ag series tap water/brackish ro elements ag2540tf; 2.5" x 40" 710 gpd tfc; tape Hot Water Sanitization also offers additional advantages as compared to biocide options, including. RejectionPart NumberAG2514TF170 GPD6 ft299.5%99%1206718Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. Duratherm Hot Water Sanitization also offers additional advantages as compared to biocide options, including. Thin Film Membrane (TFM )Typical Operating Pressure. In numerous pure water applications, GE Osmonics Duratherm Hot Water Sanitization is utilized to ensure consistent product quality, bacteria free packaging and membrane system performance.

6 psig (41 kPa) per element36 psig (248 kPa) per vesselFeed NTU. RejectionPart NumberAG4021TF1,050 GPD42 ft299.5%99%1206750Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. Ge desal (1206803) ak3218t 3.2" x 18" tfc; (20" ametek) brackish water 460 gpd low energy ro membrane Its dimensions are 8" W X 40" L and the maximum pressure is 600 psig. Individual flux may vary 25%/ 15%.Operating and Design ParametersMembrane. The device Typical Operating Flux is 10 20 GFD (15 35) L.H 1.M 2 and the Typical Operating Pressure is 200 psig.

Chlorine Tolerance is 500 ppm hrs and the recommended pH operating below 50 C is 2.0 10.0. No membrane damage, sanitization of the permeate side of the membrane, easy direct access or easy to produce, killing bacteria, preventing bio fouling development, non toxic, no permit required to store or handle chemical, no disposal costs and comparatively inexpensive. Its dimensions are 4" W X 40" L and the maximum pressure is 600 psig. These elements allow moderate energy savings, and are considered a standard in the industry. Dialysis, Pharmaceuticals/Food/Cosmetics /Drinking Water and Power/Semi conductor/Sensitive Water. RejectionPart NumberAG2521TF325 GPD12 ft299.5%99%1206719Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. The capacity of the GE Desal HWS 2540 Durtherm RO Membrane is 630 Gallons Per Day. This element is designed with male end connections. Element Specifications ModelFlowActive AreaAvg. AG4021TF High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers.

No membrane damage, sanitization of the permeate side of the membrane, easy direct access or easy to produce, killing bacteria, preventing bio fouling development, non toxic, no permit required to store ge desal (1207229) h series nano filtration elements hl2521tf, desal 380 gpd nano or handle chemical, no disposal costs and comparatively inexpensive. Thin Film Membrane (TFM )Typical Operating Pressure. Thin Film Membrane (TFM )Typical Operating Pressure. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH. AG4040TF High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. Part #'s also associated ge desal (1207231) h series nano filtration elements hl2540tf, desal 860 gpd nano with GE Desal HWS 8040 Duratherm is Desal Part # 1228481.

Chlorine Tolerance is 500 ppm hrs and the recommended pH operating below 50 C is 2.0 10.0. RejectionPart NumberAG4040TF2,200 GPD85 ft299.5%99%1206774Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. Thin Film Membrane (TFM )Typical Operating Pressure. Part #'s also associated with GE Desal HWS 4040 Duratherm is Desal Part # 1228459. It has a Thin Film Membrane and the Maximum Temperature is 122 F (50 C). The device Typical Operating Flux is 10 20 GFD (15 35) L.H 1.M 2 and the Typical Operating Pressure is 200 psig. Recommended pH (cleaning below 50 C) is 2.0 11.5 and the Maximum Pressure Drop is 15 psig per element; 60 psig per vessel. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH.

The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. The device Typical Operating Flux is 10 20 GFD (15 35) L.H 1.M 2 and the Typical Operating Pressure is 200 psig. 200 psig (1,379 kPa)Maximum Pressure. These elements allow moderate energy savings, and are considered a standard in the industry. Individual flux may vary 25%/ 15%. Operating and Design Parameters Membrane. This element is designed with male end connections. Element Specifications ModelFlowActive ge desal (1206718) ag series tap water/brackish ro elements ag2514tf; 2.5" x 14" 180 gpd tfc; tape AreaAvg. Duratherm HWS elements are designed, engineered and manufactured to provide consistent, reliable performance under extreme operating parameters, withstanding periodic exposure to temperatures as high as 90 C for cleaning and chemical free sanitization while operating below 50 C. AG3308T High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. AK Low Pressure Brackish Water Elements are selected when high rejection and low operating pressures are desired. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH. 10 psig (69 kPa) per element50 psig (345 kPa) per vesselFeed NTU. GE Osmonics Duratherm high temperature water sanitization is an effective and cost efficient solution for many HWS RO Industry Applications including.

These elements allow moderate energy savings, and are considered a standard in the industry. 10 20 GFD (15 35) L.H 1.M 2 The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. Chlorine Tolerance ge desal (1206761) ag series tap water/brackish ro elements ag4040ff; 4" x 40" 2300 gpd tfc; fiber is 500 ppm hrs and the recommended pH operating below 50 C is 2.0 10.0. The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. These elements allow moderate energy savings, and are considered a standard in the industry. Thin Film Membrane (TFM )Typical Operating Pressure. This element is designed with male end connections. Element Specifications ModelFlowActive AreaAvg. 10 20 GFD (15 35) L.H 1.M 2 GE Osmonics Duratherm high temperature water sanitization is an effective and cost efficient solution for many HWS RO Industry Applications including. This element is designed with male end connections. Element Specifications ModelFlowActive AreaAvg.

The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. These elements allow significant energy savings since good rejection is achieved at operating pressures as low as 100 psig (689 kPa). 2.0 11.5Maximum Pressure Drop. Recommended pH (cleaning below 50 C) is 2.0 ge desal (1229607) durtherm hot water sanitization hws 2521 durtherm 2.5" x 21" 270 gpd 10.0 and the Maximum Pressure Drop is 15 psig per element; 60 psig per vessel. GE Osmonics Duratherm high temperature water sanitization is an effective and cost efficient solution for many HWS RO Industry Applications including. 200 psig (1,379 kPa)Maximum Pressure. This element is designed with flush end connections.Element######Thin Film Membrane (TFM )Typical Operating Pressure. Recommended pH (cleaning below 50 C) is 2.0 11.5 and the Maximum Pressure Drop is 15 psig per element; 60 psig per vessel. This element is designed with flush end connections.Element######AG2540TF High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. 122 F (50 C)Chlorine Tolerance.

Product Flow 107 PSIThe GE Desal AK2521TF;Dry Filmtec Style reverse osmosis elements are used for brackish water desalination.The A Series thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.GE Osmonics Desal AK2521TF;High Rejection Brackish Water reverse osmosis elements feature a tape outerwrap and 28 mil feed spacers and is designed with male end connections.GE Desal AK High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 100 psig are desired. The capacity of the GE Desal HWS 4040 Durtherm RO Membrane is 2200 Gallons Per Day. 10 psig (69 kPa) per element50 psig (345 ge desal (1228430) durtherm hot water sanitization hws 2540 durtherm 2.5" x 40" 630 gpd kPa) per vesselFeed NTU. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH. Ge desal (1220990) h series nano filtration elements hl4040tf, desal 2720 gpd nano 10 20 GFD (15 35) L.H 1.M 2 Duratherm HWS elements are designed, engineered and manufactured to provide consistent, reliable performance under extreme operating parameters, withstanding periodic exposure to temperatures as high as 90 C for cleaning and chemical free sanitization while operating below 50 C. 10 20 GFD (15 35) L.H 1.M 2 The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.

The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.