These elements allow moderate energy savings, and are considered a standard in the industry.. Thin Film Membrane (TFM )Typical Operating Pressure. 122 F (50 C)Chlorine Tolerance. AK3218T Low Pressure Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. 10 20 GFD (15 35) L.H 1.M 2 Product flow 107 PSI)The GE Desal AK2514TF Dry Filmtec Style reverse osmosis elements are used for brackish water desalination.The Desal AK2514TF RO element is tape wrapped.The A Series thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.GE Osmonics Desal AK2514TF High Rejection Brackish Water reverse osmosis elements feature a tape outerwrap and 28 mil feed spacers and is designed with male end connections.GE Desal AK High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 100 psig are desired. 450 psig (3,103 kPa)Maximum Temperature. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH. 10 20 GFD (15 35) L.H 1.M 2 Product flow 107 PSI)The GE Desal AK4040FF Dry Filmtec Style reverse osmosis elements are used for brackish water desalination.The Desal AK4040FF RO element is tape wrapped.The A Series thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.GE Osmonics Desal AK4040FF High Rejection Brackish Water reverse osmosis elements feature a tape outerwrap and 28 mil feed spacers and is designed with male end connections.GE Desal AK High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 100 psig are desired. These elements allow moderate energy savings, and are considered a standard in the industry. Product Flow 107 PSIThe GE Desal AK2521TF;Dry Filmtec Style reverse osmosis elements are used for brackish water desalination.The A Series thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.GE Osmonics Desal AK2521TF;High Rejection Brackish Water reverse osmosis elements feature a tape outerwrap and 28 mil feed spacers and is designed with male end connections.GE Desal AK High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 100 psig are desired.

This element is designed with flush end connections.Element######Individual flux may vary 25%/ 15%. Operating and Design Parameters Membrane. Individual flux may vary 25%/ 15%. Operating and Design Parameters Membrane. 10 20 GFD (15 35) L.H 1.M 2 The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. Individual flux may vary 25%/ 15%.Operating and Design ParametersMembrane. These elements allow significant energy savings since good rejection is achieved at operating pressures as low as 100 psig (689 kPa).

AG4040FF High Rejection Brackish Water elements feature a FRP outerwrap and 27 mil feed spacers. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry. 10 20 GFD (15 35) L.H 1.M 2 Product flow 107 PSI)The GE Desal AK4014TF Dry Filmtec Style ge desal (1206816) ak series low pressure ro elements, dry ak4040tf; 4" x 40" 2350 gpd tfc lp dry reverse osmosis elements are used for brackish water desalination.The Desal AK4014TF RO element is tape wrapped.The A Series thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.GE Osmonics Desal AK4014TF High Rejection Brackish Water reverse osmosis elements feature a tape outerwrap and 28 mil feed spacers and is designed with male end connections.GE Desal AK High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 100 psig are desired. RejectionPart NumberAG4014TF585 GPD22 ft299.5%99%1206748Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. 10 psig (69 kPa) per element50 psig (345 kPa) per vesselFeed NTU. This element is designed with male end connections. Element Specifications ModelFlowActive AreaAvg. 10 20 GFD (15 35) L.H 1.M 2 The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. Individual flux may vary 25%/ 15%. Operating and Design Parameters Membrane. This element is designed with male end connections. Element Specifications ModelFlowActive AreaAvg.

AG High Rejection Brackish ge desal (1206748) ag series tap water/brackish ro elements ag4014tf; 4" x 14" 550 gpd tfc; tape Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. Individual flux may vary 25%/ 15%. Operating and Design Parameters Membrane. 450 psig (3,103 kPa)Maximum Temperature. This element is designed with male end connections. Element Specifications ModelFlowActive AreaAvg. AK Low Pressure Brackish Water Elements are selected when high rejection and low operating pressures are desired. These elements allow moderate energy savings, and are considered a standard in the industry. RejectionPart NumberAG2521TF325 GPD12 ft299.5%99%1206719Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. AG4014TF High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. This element is designed with flush end connections. Element Specifications ModelFlowActive AreaAvg. These elements allow moderate energy savings, and are considered a standard in the industry. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH.

10 20 GFD (15 35) L.H 1.M 2 Product flow 107 PSI)The GE Desal AK4021TF Dry Filmtec Style reverse osmosis elements are used for brackish water desalination.The Desal AK4021TF RO element is tape wrapped.The A Series thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.GE Osmonics Desal AK4021TF High Rejection Brackish Water reverse osmosis elements feature a tape outerwrap and 28 mil feed spacers and is designed with male ge desal (1206774) ag series tap water/brackish ro elements ag4040tf; 4" x 40" 2200 gpd tfc; tape end connections.GE Desal AK High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 100 psig are desired. AG4021TF High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. RejectionPart NumberAG4040TF2,200 GPD85 ft299.5%99%1206774Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. 2.0 11.5Maximum Pressure Drop. Thin Film Membrane (TFM )Typical Operating Pressure.

AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard ge desal (1206784) ag series tap water/brackish ro elements ag8040f 400; 8"x40" 11000 gpd tfc;fiber in the industry. The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. This element is designed with flush end connections. Element Specifications ModelFlowActive AreaAvg. AG2521TF High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. Individual flux may vary 25%/ 15%. Operating and Design Parameters Membrane. Individual flux may vary 25%/ 15%. Operating and Design Parameters Membrane. Individual flux may vary 25%/ 15%. Operating and Design Parameters Membrane. This element is designed with male end connections. Element Specifications ModelFlowActive AreaAvg. This element is designed with male end connections. Element Specifications ModelFlowActive AreaAvg. These elements allow moderate energy savings, and are considered a standard in the industry. These elements allow moderate energy savings, and are considered a standard in the industry.

1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH. 10 psig (69 kPa) per element50 psig (345 kPa) per vesselFeed NTU. This element is designed with male end connections. Element Specifications ModelFlowActive AreaAvg. 10 20 GFD (15 35) L.H 1.M 2  ge desal (1220979) ak series low pressure ro elements, dry ak4014tf; 4" x 14" 550 gpd tfc lp dry The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. This element is designed with male end connections. Element Specifications ModelFlowActive AreaAvg.

200 psig (1,379 kPa)Maximum Pressure. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH. Thin Film Membrane (TFM )Typical Operating Pressure. AG2540TF High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. RejectionPart NumberAG3308T320 GPD (1.2 m3/d)99.5%99%1206740Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. AG8040F High Rejection Brackish Water elements feature a FRP outerwrap and 31 mil feed spacers. Ge desal (1206719) ag series tap water/brackish ro elements ag2521tf; 2.5" x 21" 300 gpd tfc; tape 122 F (50 C)Chlorine Tolerance. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH. The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. This element is designed with flush end connections.Element###### AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired.

RejectionPart NumberAG2540TF740 GPD28 ft299.5%99%1206729Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. Product Flow 107 PSIThe GE Desal ge desal (1206750) ag series tap water/brackish ro elements ag4021tf; 4" x 21" 1050 gpd tfc; tape AK2540TF Dry Filmtec Style reverse osmosis elements are used for brackish water desalination.The A Series thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.GE Osmonics Desal AK2540TF High Rejection Brackish Water reverse osmosis elements feature a tape outerwrap and 28 mil feed spacers and is designed with male end connections.GE Desal AK High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 100 psig are desired. Individual flux may vary 25%/ 15%. Operating and Design Parameters Membrane. The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH.

RejectionPart NumberAG8040F 40010,500 GPD400 ft299.5%99%1206784Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. Individual flux may vary 25%/ 15%.Operating and Design ParametersMembrane. Thin Film Membrane (TFM )Typical Operating Pressure. Thin Film Membrane (TFM )Typical Operating Pressure. 10 psig ge desal (1206779) ag series tap water/brackish ro element ag8040f 300; 8"x40" 9000 gpd tfc;fiber (69 kPa) per element50 psig (345 kPa) per vesselFeed NTU. AG2514TF High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. These elements allow moderate energy savings, and are considered a standard in the industry. RejectionPart NumberAG8040F9,200 GPD350 ft299.5%99%1206779Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. Individual flux may vary 25%/ 15%. Operating and Design Parameters Membrane. Thin Film Membrane (TFM )Typical Operating Pressure. AG4040TF High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers.

AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 ge desal (1206802) ak series low pressure ro elements ak2540tf; 2.5" x 40" 710 gpd tfc lp dry psig (1,379 kPa) are desired. RejectionPart NumberAG4021TF1,050 GPD42 ft299.5%99%1206750Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. Ge desal (1206803) ak3218t 3.2" x 18" tfc; (20" ametek) brackish water 460 gpd low energy ro membrane AG3308T High Rejection Brackish Water elements feature a tape outerwrap and 28 mil feed spacers. Thin Film Membrane (TFM )Typical Operating Pressure. 10 psig (69 kPa) per element50 psig (345 kPa) per vesselFeed NTU. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. RejectionPart NumberAG2514TF170 GPD6 ft299.5%99%1206718Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. Thin Film Membrane (TFM )Typical Operating Pressure. The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.

Thin Film Membrane (TFM )Typical Operating Pressure. 200 psig (1,379 kPa)Maximum Pressure. 10 20 GFD (15 35) L.H 1.M 2 Product flow 107 PSI)The GE Desal AK8040F 400 Dry Filmtec Style reverse osmosis elements are used for brackish water desalination.The Desal AK8040F 400 RO element is tape wrapped.The A Series thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.GE Osmonics Desal AK8040F 400 High Rejection Brackish Water reverse ge desal (1206718) ag series tap water/brackish ro elements ag2514tf; 2.5" x 14" 180 gpd tfc; tape osmosis elements feature a tape outerwrap and 28 mil feed spacers and is designed with male end connections.GE Desal AK High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 100 psig are desired. Thin Film Membrane (TFM )Typical Operating Pressure. AG High Rejection Brackish ge desal (1206812) ak series low pressure ro elements, dry ak4021tf; 4" x 21" 1050 gpd tfc lp dry Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH. The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. 2.0 11.5Maximum Pressure Drop. 10 20 GFD (15 35) L.H 1.M 2 Product flow 107 PSI)The GE Desal AK4040TF Dry Filmtec Style reverse osmosis elements are used for brackish water desalination.The Desal AK4040TF RO element is tape wrapped.The A Series thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.GE Osmonics Desal AK4040TF High Rejection Brackish Water reverse osmosis elements feature a tape outerwrap and 28 mil feed spacers and is designed with male end connections.GE Desal AK High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 100 psig are desired.

Thin Film Membrane (TFM )Typical Operating Pressure. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. Product flow 107 PSI)The GE Desal AK8040F Dry Filmtec Style reverse osmosis elements are used for brackish water desalination.The Desal AK8040F RO element is tape wrapped.The A Series thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.GE Osmonics Desal AK8040F High Rejection Brackish Water reverse osmosis elements feature a tape outerwrap and 28 mil feed spacers ge desal (1206800) ak series low pressure ro elements, dry ak2540ff; 2.5" x 40" 710 gpd tfc lp dry and is designed with male end connections.GE Desal AK High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 100 psig are desired. 6 psig (41 kPa) per element36 psig (248 kPa) per vesselFeed NTU. The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux ge desal (1206820) ak series low pressure ro elements, dry ak8040f; 8" x 40" 9000 gpd tfc; lp dry and excellent sodium chloride rejection. RejectionPart NumberAG4040FF2,200 GPD85 ft299.5%99%1206761Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. The A Series, family of proprietary thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. RejectionPart NumberAK3218T460 GPD 99.5%99%1206803Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77 F (25 C), 15% recovery, pH 7.5 after 24 hours. AG8040F 400 High Rejection Brackish Water elements feature a FRP outerwrap and 27 mil feed spacers. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH.

10 psig (69 kPa) per element50 psig (345 kPa) per vesselFeed NTU. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH. 1,000 ppm hrs, dechlorination recommendedOptimum Rejection pH. These elements allow moderate energy savings, and are considered a standard in the industry. GFD (15 35) L.H 1.M 2 Product flow 107 PSI)The GE Desal AK2540FF Dry Filmtec Style reverse osmosis elements are used for brackish water desalination.The Desal AK2540FF RO element is tape wrapped.The A Series thin film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.GE Osmonics Desal AK2540FF High Rejection Brackish Water reverse osmosis elements feature a tape outerwrap and 28 mil feed spacers and is designed with male end connections.GE Desal AK High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 100 psig are desired.