Additional padding is incorporated at the forehead and either side of the face to maximize shock absorption from ballistic threats.. Ballistic shield shall have high bulletproof ability.2. A six point elastic attachment system allows the user to adjust for the perfect fit. Warranty is void if you fail to follow the washing and care instructions recommended by Security Pro or if the vest is subject to abuse or abnormal use. 30% lighter than other steel hard armor plates. Quick release buckles so you can throw it on in a hurry or pull it off fast as needed. Special ceramic with aramid backingsWeight. Capable of stopping multiple hits from 7.62mm x 51mm (.308 caliber) FMJ and lesser threat as AK 47/ Kalashnikov 7.62mm x 39mm Brand NEW CERAMIC PLATE for Body Armor BulletProof vests For use with a Level IIIA Vest (sold separately) The same Ceramic Plates are made for the army and for Armed ally forces in IraqThese ceramic plates are made out of a special material that is both light and strong.The plates reinforce a Level III A vest making it a level IV vest.

In the event such a defect is found, return the vest to Security Pro Security Pro in its discretion will repair or replace the defected part or the entire vest. (1) Left and right Arc of shield body. NIJ Threat level III Single curve Multi hit capability Front/Back placement SIZE WEIGHT ( lbs. 80 cm, R500 Size of anti trauma rubber foam. The plates fit in the vest's especially designed pockets. Both sides of shield shall be planed and have equal thickness in form of arc (Arc Face R 500). On the back side, the ergonomics handle shall be made of high tough steel tube which allows to handle the shield with left/ right/ both hand, in order to have comfortable holding and fasten by screw and nut to shield body. 13 kilo Protection level NIJ level IV Stand AloneSize 10.

Our shields have been developed to give unmatched protection while the unique handle design allows for comfortable ambidextrous use and optimum mobility. "In conjunction" plates are designed to stop the specified threat within the vest/plate matrix. (.308) FMJ at 2780 fps and lesser threats without additional ballistic support Ammunition. Enter military or law enforcement agency below for verification.The 8x10 titanium/steel plate (8x10 level 3 steel plate) rifle hard armor plate, size 8x10 titanium/steel plate, titanium rifle plate Ballistic Shield has been developed over a number of years and through considerable research evolved into the optimum compromise between weight and bullet resistance. See our separately sold III A vest, also on our website.

Both ends shall be planed and shall no be exposed.(3) Handle and carrying strap. Ballistic Entry Shield (NIJ level IIIA) Note. Tactical Ballistic Mask level III A ,as featured in the TV show Criminal MindsThis one of a kind ballistic mask,it was developed for special ops teams to save lives while engaging the enemy.It provide shock element and can save your face from fragments and level IIIA ballistic threats.Ballistic Face MaskThreat Level 3AErgonomically fit, our Ballistic Face Mask has been designed to maximize comfort while providing total front facial protection. Cover = Kordura by DuPont Notice. (.308) FMJ at 2780 fps and lesser threats without additional ballistic support Protection level NIJ Level III with IIIA vestSize 10. Capable of stopping multiple ballistic shoulder protection level iiia ballistic shoulder (upper arm) pads (pair) hits from 7.62mm x 51mm (.308 caliber) FMJ and lesser threat as AK 47/ Kalashnikov 7.62mm x 39mm These ceramic plates are made out of a special material that is both light and strong.The plates reinforce a Level III A vest making it level III vest. 25.4cm x 30.48cm Thickness 10mmWeight 7.6 lb 3.4kgDescription. (.308) FMJ at 2780 fps and lesser threats when used with IIIA vest Side SAPI Plate Level IIIAttach to vests with MOLLE web straps sewn onto the vest, e.g., Interceptors, our Outer Tactical Vest, or "Turtle" JacketThe lightest, thinnest, and easiest to wear solution for side protection in 5" by 8", and 6" by 8" sizes.A "side SAPI Rifle Plate" this size is not big enough to stop a full 6 rounds to pass formal Level III tests, but will stop com rifle threats, with a LEVEL II or III A VEST SUPPORTING:3 rounds of 7.62 X 39 mm FMJ, OR 3 rounds of .223 / 5.56 X 45 mm FMJ / M 193 OR 3 rounds of 5.56 X 45 mm M 855 / SS 109 OR 1 round of .308 FMJ / 7.62 X 51mm NATO Protection level NIJ Level III with IIIA vestSize 10. Construction:It is hard type ballistic shield made of Dyneema and integrated by high thermal pressure. 30% lighter than other steel hard armor plates. Therefore, there are to cancellations or refunds on these items. THE WARRANTY IS EXTENDED ONLY TO THE ORIGINAL USER PURCHASER.

Ceramic protection plate::ballistic plate 10" x 12" level iii ::rifle plate Allocation of window hole and frame shall be integrated with shield body. Both ends shall be planed and shall not be exposed. ) THICKNESS ( inches ) 10” x 12” (20 x 25 cm) 3.08 (2.2kg) .70 (1.8 cm) 22518 Ceramic Protection Plate10x12 Level III/IV Light Weight 5.5 This plate is designed to achieve either NIJ Level III or NIJ Level IV protection when worn in conjunction with an NIJ certified Level IIIA Vest. Able to defeat level IV threats when used with level IIIA vest. Ballistic Shield level III composite Spectra (Dyneema) size. The Ballistic Shields incorporate a lightweight design ballistic plate carries is made our of kevlar level iiia that has protection up to NIJ Level IIIA. Able to defeat level IV threats without support from tactical vest. 10' X 12' (250mm X 300mm) WEIGH. 25.4cm x 30.48cm Thickness 7mmWeight 5.6 lb 2.4kgDescription. Protection level NIJ Level IV with IIIA vestSize 10. On the low back of the shield, using bolt/nut tightly fasten the foldable stand.

25.4cm x 30.48cm Thickness 15mmWeight 7.4 lb 3.4kgDescription. The PBP is well suited for water (salt water) environments as well as conditions involving heavy vibration. The removable ballistic insert is attached to the jacket with zippers and hook and loop and overlaps in the front to provide full protectionWARRANTY Body Armor Vests manufactured by Security Pro are made ceramic level iii single curve in accordance with a strict Quality Control Program. ID patch as request Shield chassis with wheel Mobile car for Rifle ballistic shield Ballistic Shield Level III ( with glass / window ) 1. 20x 34 (or custom size ) Weight. The Outer shell is guaranteed to be free of defects in material or workmanship for twenty four (24) months from date of issue. Arc face R500, width of straight line (rear side). NIJ III level, multiple hits, also able to stop AK47 steel core bullets. Similar to the Interim Small Arms Protective Overvest (ISAPO) worn by US troops. Able to defeat level IV threats without support from tactical vest. 14 kgs ( with ballistic glass/ window) Ballistic Resistance Level IIIA base on NIJ STD 0108.01 Options. This is a ballistic protection item.

20.32cm x 25.4cm Thickness 7mmWeight 3.8 lb 1.7kgDescription. It provides the tactical specialist with resistance to ballistic and fragmentation threats. Classic style nylon zip front jacket with a lightweight fleece lining. 10' X 12' (250mm X 300mm) WEIGH. 2.3kgs (5.1 lbs.)Size available. To prevent loosen construction, connection by two pieces up and down or window hole opened after formation are not allowed.

Although this plate is rated NIJ Threat Level III, additional support with a level III A vest is needed for semi armor piercing rounds.Protect yourself from high velocity rounds with this incredibly comfortable and ultra light Hard Armor Plate. Capable 10 x 12 stand alone ceramic , ceramic hard armor rifle plates, sapi plates, ceramic hard armor plates of stopping multiple hits from 7.62mm x 51mm (.308 caliber) FMJ and lesser threat as AK 47/ Kalashnikov 7.62mm x 39mm Protection level NIJ level IV Stand AloneSize 10. 25.4cm x 30.48cm Thickness 20mmWeight 6.6 lb 3.0kgDescription. Window hole and frame shall be reserved in the middle. "In conjunction" plates are lighter, more comfortable, and less bulky than stand alone plates. 25.4cm x 30.48cm Thickness 21mmWeight 8.0 lb 3.6kgDescription. No holes, foam blister, crack and pressed mark is allowed. 40 cm x 40 cm, thickness 10 mm Weight.

An ultra light rifle plate, the PBP provide excellent protection against high velocity rounds. Attached comfortable carrying strap. Window hole shall be covered by transparent bulletproof bulletproof jacket level ii::ballistic protection windbreaker glass and fasten tightly to shield by screw and nut. Stick soft sponge (Thickness 10mm, length 40cm X width 40 cm 2 cm) on the shield to reduce the impact. The price shown here is for one plate. Best used over a soft body armor vest to help prevent blunt trauma, and help catch bullet splatter.Tough DuPont Cordura nylon carrier, with 5 color choices, all coated for waterproofing. Hole and frame shall be smooth. Using strong metal tube for the material.(5) The external edge of shield shall be dressed with rubber strip of the same color and fasten to the surrounding of external frame. 30% lighter than other steel polyethylene ballistic plate nij threat level iii single curve tactical gear and body armor, this tactical gear and body armor is well suited for water (salt water) environments as well as conditions hard armor plates. Ballistic shield shall be smooth without angle on both sides. /leta.htmlThe plates fit in the vest's 10x12 inch pockets.SIZE.

(see attached photo)(1) Shield body. Single curvature BALLISTIC RIFLE SHIELD 100% UHMWPE ( Dyneema ) ballistic fabric Size of shield. 7.62x39mm Mild Steel Core (Kalashnikov, AK47)5.56x45mm Lead Core (M193, L2A1)7.62x39mm Lead Core (CJLC)7.62x51mm Lead Core (NATO Ball, M80 10 x 12 standalone ceramic lightweight ,ceramic hard armor rifle plates, sapi plates, ceramic hard armor plates SLR, L2A2)Specs:Quality 20 NosProtection Level Level IIISize 100x58cm ( / 1.5 cm)Window Size 25 x 10 cmWeight 19 kg / 2kgShape CurveColor Black Sec Pro proudly supplieslaw enforcement, military and public safety professionals.This plate carries is made our of kevlar level IIIA.Convenient, modular exterior wear. INCIDENTAL AND/OR CONSEQUENTIAL DAMAGES ARE EXCLUDED FROM THIS WARRANTY These items are custom made, make to order products. THIS WARRANTY IS IN LIEU OF ALL WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY. BALLISTIC ENTRY SHIELD LEVEL IIIA WITH LIGHT BALLISTIC VISION PORT 4INCH X 16INCH ARM PADDING RETENTION STRAPS MULTI HITlead acid battery for long life and recharger included Protection level NIJ Level III with IIIA vestSize 8.

While the users are not available to hold it, this stand can support the shield easily. Some fragments may penetrate the plate, but are of much reduced energy easily stopped by the ballistic vest worn underneath. The Ballistic Panels are guaranteed to be free of defects in material or workmanship for five 10x12 titanium/steel plate (steel plate iii) rifle hard armor plate, 10x12 titanium/steel plate, titanium rifle plate (5) years from date of issue.