The digital display is user friendly and monitors PV charge performance.. The T80 can deliver 80 amps continuous output to 12 , 24 , 36 or 48 volt battery systems from PV arrays with open circuit voltage up to 140 VDC (150 volts absolute maximum voltage). Additional features provided in the Solar Boost 2512iX include automatic or manual equalization, battery temperature sensor input, full IPN network compatibility, and an auxiliary output. Handles spikes up to 1,500V/A, so your controller won t be damaged by surges. This allows for a much smaller wire size between the array and battery in large systems. The user configurable auxiliary output can serve as either a 25 amp load controller or a 2 amp auxiliary battery charger. Its purpose is to keep your batteries properly fed and safe for the long term. Controller with digital display. Maximum charge current is 40 amps output at 12 and 30 amps at 24 VDC. The T80HV is the only MPPT charge controller that works with the newer higher voltage PV modules.

A space grade product, at a down to earth price!!. 7 amp PV7D is a cost effective shunting regulator for smaller 6V, 12V or 24V solar only applications, expandable to handle charging currents from 30 to 500A. The internal temperature controlled variable speed fan runs just fast enough to maintain optimum reliability. APO 510081 This 25 amp solar charge controller is for 12 volt systems. The T80HV is the only MPPT charge controller that works with the newer higher voltage PV modules. SB3048 is designed to charge 24 and 48 volt battery systems from a 48 to 60 volt array (maximum open circuit voltage is 140). This controls very popular in RV installations. The low cost Solar Boost 2512i provides a fully automatic 3 stage charge controller system. Maximum charge current is 60 amps at 12 or 24 volts.. Maximum charge current is 30 amps output at 24 or 48 VDC.

Optional box allows surface mounting. The T80 Charge Controllers integrate maximum power point tracking, battery charge management, state of charge information and communications into a single device. High efficiency power circuits blue sky energy solar boost sb3048l charge controller and robust thermal design minimize heat generation. This unit includes charging and full battery LED indicators. The 6024H is designed for charging 12 or 24 volt batteries from 36 , 48 or 60 volt PV arrays (maximum open circuit voltage is 140). Maximum open circuit PV array voltage is 57 VDC. A partial IPN network interface is also included to allow use of the IPN Remote or IPN ProRemote displays. Includes TriMetric¿ Battery Energy Meter functions. Handling up to 7 amps of array current and up to 105 watts of solar power, this charge controller is intended for use with 12 Volt solar panels and maintains 12 Volt batteries in a fully charged state. Front cover with digital display for SB50L. Ultra High Efficiency Solar & Wind Charge Controllers Waterproof and better than 99.5% efficient with charging currents of 0.5 to 25 amps, a 2 15% gain over competitors.

SB3048 is designed to charge 24 and 48 volt battery blue sky energy solar boost sb2512i charge controller systems from a 48 to 60 volt array (maximum open circuit voltage is 140). The yellow charging light indicates that your battery is charging, and the green light indicates a fully charged battery.######Apollo Solar T80 with a huge wiring bay, large connection lugs, serial connections, AUX1 & AUX2 relay built in!... It mounts in a 5 11/16" x 3 15/16" cut out and is wired from the rear. Like its blue sky energy solar boost sb50rd25 cousin, The T80HV TurboCharger integrates Maximum Power Point Tracking, battery charge management, state of charge information and communications into a single device. Maximum charge current is 30 amps output at 24 or 48 VDC. (Shunt not included) Detailed Specifications.

It can also be used to charge a 12 volt battery from a 24 volt array. 25 amp NC25A is a series regulator designed for alternative energy charging systems ranging from .1A to 25A. SB3024iL is designed to charge 12 and 24 volt battery systems from a 24 volt array (maximum open circuit voltage is 57). Protects battery from overcharge and discharge For use with 12 Volt solar panels and batteries only Handles up to 105 Watts of power Handles up to 7 Amps of array current Maintenance f The low cost Solar Boost 2512iX provides a fully automatic 3 stage charge controller system. Comes with smart shunt board, battery temperature sensor and associated cables.

Flexcharge Solar & Wind Controllers Pv7d Controller, 1 1/2"w 7/8"h 1"d. The SB50L charge apollo solar t80 charge controller controller can be used on 12 and 24 volt systems. It also includes automatic or manual equalization, battery temperature sensor input, full IPN network compatibility, and an auxiliary output. A charge controller is an essential part of nearly all power systems that charge batteries (required for systems 15W and above). The T80HV TurboCharger produces full rated power without de rating up to 45 degrees C ambient temperature. Above that, the output current is reduced gradually to protect the life of the T80HV and then automatically ramped up as the temperature decreases. Controller with digital display. The user configurable auxiliary output can serve as either a 25 amp load controller or a 2 amp auxiliary battery charger. 200 Volt maximum PV open circuit voltage ( 160 Vmp ) Requires New 250Vdc Breakers Optimized Maximum Power Point Tracking (MPPT) Patent Pending 80 Amps continuous output blue sky energy solar boost sb3024il charge controller at up to 45°C ambient temperatures Wire PV modules in series up to 72 VDC nominal (140 Voc max) Charge 12, 24, 36 or 48 V batteries Built in Battery Energy Monitor using TriMetric Technology (TriMetric is a trademark of Bogart Engineering, Inc.) Parallel T80s for higher currents Optional Wireless Remote (or Wired) Displays are also available Internal 4 line 20 character LCD with backlight. Ideal for solar (PV) and permanent magnet generators including outboard motors and smalle Battery temperature sensor for Solar Boost charge controllers. Works on single or dual battery bank systems and uses the FlexCharge Energy State Taper Charge Method for high efficiency, giving a full charge without gassing on 12V system with gel, AGM and flooded battery types. Like its cousin, The T80HV TurboCharger integrates Maximum Power Point Tracking, battery charge blue sky energy solar boost sb50pdl management, state of charge information and communications into a single device.

Providing maintenance free protection for your batteries and solar panels, The Sunforce 7 Amp Charge Controller prevents overcharge and discharge of 12 Volt batteries. Reverse polarity protected and fully sealed for use in high humidity environments. Sunforce Seven Amp Charge Controller Solar. With 80 Amps continuous output, the has the largest capacity in the industry by over 30%. A partial IPN network interface is also included to allow use of the IPN Remote or IPN ProRemote displays. The new T80HV allows you to wire modules in series up to 200 Voc max/160 volts blue sky energy solar boost sb3048dl charge controller nominal.